- ページ 3

防犯カメラ HIKVISION TURBO HD DF7T SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DF7T Series 11 ページ。
HIKVISION TURBO HD DF7T Series にも： ユーザーマニュアル (10 ページ)

ページを印刷する
1 Introduction

1.1 Product Features

This series of camera adopts high performance sensor
and advanced circuit board design technology. It
features high resolution, low distortion, and low noise,
etc. It is suitable for surveillance system and image
process system.
The main features are as follows:
 High performance CMOS sensor and high resolution
bring high-quality image;
 Low illumination, 0.01 Lux @ (F1.2, AGC ON), 0 Lux
with IR;
 IR cut filter with auto switch;
 OSD menu, parameters are configurable;
 Auto white balance and internal synchronization;
 SMART IR mode;
 True WDR;
 Advanced 3-axis design meets different installation
requirements;
1.2 Overview
The cables of device vary according to different models. The
cables of each type are shown in the figures below, please
refer to the actual sample.
You can debug the camera by connecting an auxiliary HD
TVI cable to the auxiliary video output.
1.2.1 Overview of Type I Camera
Lens
Menu Button
Bubble
1.2.2 Overview of Type II Camera
Lens
Menu Button
Bubble
Cables
Auxiliary
Video Output
Back Box
Figure 1-1 Overview of Type I Camera
Cables
Base Plate
Auxiliary
Video Output
Back Box
Figure 1-2 Overview of Type II Camera
24VAC/12VDC
Power Cord
Model I Cables
DC 12V Power Cord
Video Cable
Model II Cables
24VAC/12VDC
Power Cord
Video Cable
Model I Cables
12VDC Power Cord
Video Cable
Model II Cables
Video Cable