- ページ 5

防犯カメラ HIKVISION TURBO HD DF7T SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DF7T Series 11 ページ。
HIKVISION TURBO HD DF7T Series にも：ユーザーマニュアル (10 ページ)

ページを印刷する

Type I Camera：

Figure 2-3 Fix the Camera to the Ceiling

6. Connect the video cable to the monitor and connect

the power cable to the power supply.

7. Adjust the camera according to Figure 2-4 to get an

optimum angle.

1). View the camera image with the monitor.

2). Rotate the panning table to adjust the pan

direction.

3). Loosen the tilting lock screw.

4). Rotate the tilting table to adjust the tilt

direction.

5). Tighten the tilting lock screw.

6). Rotate the camera to adjust the lens to the

surveillance angle.

Type I Camera：

0° to 75°

0° to 355°

8. Tighten the screws to secure the bubble with the

back box/base plate.

Remove the protection film softly after the installation is

completed in case of the scrape on the bubble during the

installation.

2.2 In-ceiling Mounting

You need to purchase an in-ceiling mount separately if you

adopt in-celling mounting.

2.2.1 In-ceiling Mounting without Gang Box

Steps:

1. Drill the screw holes and the cable hole in the ceiling

according to the supplied drill template.

2. Secure the in-ceiling mount with two screws as

shown in Figure 2-5.

0° to 355°

Figure 2-4 3-axis Adjustment

T y p e I I C a m e r a

Type II Camera:

0° to 75°

：

0° to 340°

0° to 355°