- ページ 7

防犯カメラ HIKVISION Turbo HD DS-2CES56C0T-IRFのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION Turbo HD DS-2CES56C0T-IRF 10 ページ。 Tvi bullet & turret camera

All manuals and user guides at all-guides.com

3). Loosen the No.2 adjusting screw to adjust the

tilting position (0° to 180°).

4). Tighten the No. 2 adjusting screw.

5). Loosen the No.3 adjusting screw to adjust the

rotation position (0° to 360°).

6). Tighten the No.3 adjusting screw.

0° to 360°

Figure 2. 3 3-Axis Adjustment

2.3

Installation of Type II camera

Steps:

1. Use the hex wrench to loosen the screw, and

remove the mounting base from the camera body,

shown as the figure 2.4.

Figure 2. 4 Disassemble the Camera

2. Attach the drill template (supplied) to the place

where you want to install the camera, and then drill

the screw holes according to the drill template, and

the cable hole (optional) on the ceiling.

Note:

Cable hole is required when adopting ceiling outlet to

route the cable.

47.6

Figure 2. 5 Drill Template

0° to 360°

0° to 180°

Unit： mm