HIKVISION Turbo HD DS-2CES56C0T-IRF 사용자 설명서 - 페이지 7
{카테고리_이름} HIKVISION Turbo HD DS-2CES56C0T-IRF에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION Turbo HD DS-2CES56C0T-IRF 10 페이지. Tvi bullet & turret camera
페이지 인쇄
All manuals and user guides at all-guides.com
3). Loosen the No.2 adjusting screw to adjust the
tilting position (0° to 180°).
4). Tighten the No. 2 adjusting screw.
5). Loosen the No.3 adjusting screw to adjust the
rotation position (0° to 360°).
6). Tighten the No.3 adjusting screw.
0° to 360°
Figure 2. 3 3-Axis Adjustment
2.3
Installation of Type II camera
Steps:
1. Use the hex wrench to loosen the screw, and
remove the mounting base from the camera body,
shown as the figure 2.4.
r
e
Figure 2. 4 Disassemble the Camera
2. Attach the drill template (supplied) to the place
where you want to install the camera, and then drill
the screw holes according to the drill template, and
the cable hole (optional) on the ceiling.
Note:
Cable hole is required when adopting ceiling outlet to
route the cable.
47.6
Figure 2. 5 Drill Template
0° to 360°
3
0° to 180°
2
1
r
e
Unit： mm