HIKVISION Turbo HD DS-2CES56C0T-IRF Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности HIKVISION Turbo HD DS-2CES56C0T-IRF. HIKVISION Turbo HD DS-2CES56C0T-IRF 10 страниц. Tvi bullet & turret camera
Печатать страницу
All manuals and user guides at all-guides.com
3). Loosen the No.2 adjusting screw to adjust the
tilting position (0° to 180°).
4). Tighten the No. 2 adjusting screw.
5). Loosen the No.3 adjusting screw to adjust the
rotation position (0° to 360°).
6). Tighten the No.3 adjusting screw.
0° to 360°
Figure 2. 3 3-Axis Adjustment
2.3
Installation of Type II camera
Steps:
1. Use the hex wrench to loosen the screw, and
remove the mounting base from the camera body,
shown as the figure 2.4.
r
e
Figure 2. 4 Disassemble the Camera
2. Attach the drill template (supplied) to the place
where you want to install the camera, and then drill
the screw holes according to the drill template, and
the cable hole (optional) on the ceiling.
Note:
Cable hole is required when adopting ceiling outlet to
route the cable.
47.6
Figure 2. 5 Drill Template
0° to 360°
3
0° to 180°
2
1
r
e
Unit： mm