- ページ 2

プリンター Lexmark E460 SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Lexmark E460 Series 4 ページ。 Lexmark printer user manual
Lexmark E460 Series にも：仕様 (4 ページ), クイック・リファレンス (2 ページ), テックノート (3 ページ), 印刷マニュアル (10 ページ), 接続マニュアル (5 ページ), メディア・マニュアル (4 ページ), ネットワーク設定 (4 ページ), 用品マニュアル (2 ページ), セットアップシート (2 ページ), 情報マニュアル (1 ページ), メンテナンス・マニュアル (10 ページ), (ポルトガル語）パンフレット＆スペック (6 ページ)

With the front cover open, press and hold the stop/cancel (

Watch the LCD screen. When you see the message "Resetting PC Counter", let go of

the button.

Close the front cover.

NOTE:

If you wish to confirm that the photoconductor page count has reset, print a menu

settings page.

With the printer at the ready state, press the Menu (

menus.

Press the

Press the Select (

Press

menu settings page(s) should print out.

On the menu settings page(s), look for an entry called PC Kit. If the counter has been reset

correctly, the PC Kit should read Ok.

Error messages

A Photoconductor (PC) Life Warning or an 84 - PC Kit life message indicates that the

photoconductor unit is nearing the end of its functional life and should be replaced soon. The

recommended action is to replace the photoconductor unit or have an extra one in stock. You can

press the

button to clear this message and continue printing.

A Photoconductor Exhausted or an 84 - Replace PC Kit message indicates that the

photoconductor unit has run through its functional life. At this point, you must replace the

photoconductor unit and reset the photoconductor page count to clear this message.

IMPORTANT!

The printer will stop working once this message appears. You cannot clear it without

replacing the photoconductor unit and resetting the photoconductor page count.

Alternate method

button until the checkmark on the screen is in front of Reports.

) button once to enter the Reports menu.

until the checkmark is in front of Menu Settings Page.

once. The printer should display Printing Menu Settings Page and the

) button.

) button to enter the printer