Lexmark E460 Series 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Lexmark E460 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark E460 Series 4 페이지. Lexmark printer user manual
Lexmark E460 Series에 대해서도 마찬가지입니다: 사양 (4 페이지), 빠른 참조 (2 페이지), 기술 노트 (3 페이지), 인쇄 매뉴얼 (10 페이지), 연결 매뉴얼 (5 페이지), 미디어 매뉴얼 (4 페이지), 네트워크 설정 (4 페이지), 소모품 매뉴얼 (2 페이지), 설정 시트 (2 페이지), 정보 매뉴얼 (1 페이지), 유지 관리 매뉴얼 (10 페이지), (포르투갈어) 브로셔 및 사양 (6 페이지)

페이지 인쇄
Lexmark E460 Series 빠른 시작 매뉴얼
With the front cover open, press and hold the stop/cancel (
Watch the LCD screen. When you see the message "Resetting PC Counter", let go of
3
the button.
Close the front cover.
NOTE:
If you wish to confirm that the photoconductor page count has reset, print a menu
settings page.
1.
With the printer at the ready state, press the Menu (
menus.
2.
Press the
4
3.
Press the Select (
4.
Press
5.
Press
menu settings page(s) should print out.
On the menu settings page(s), look for an entry called PC Kit. If the counter has been reset
correctly, the PC Kit should read Ok.
Error messages
A Photoconductor (PC) Life Warning or an 84 - PC Kit life message indicates that the
photoconductor unit is nearing the end of its functional life and should be replaced soon. The
recommended action is to replace the photoconductor unit or have an extra one in stock. You can
press the
button to clear this message and continue printing.
A Photoconductor Exhausted or an 84 - Replace PC Kit message indicates that the
photoconductor unit has run through its functional life. At this point, you must replace the
photoconductor unit and reset the photoconductor page count to clear this message.
IMPORTANT!
The printer will stop working once this message appears. You cannot clear it without
replacing the photoconductor unit and resetting the photoconductor page count.
Alternate method
button until the checkmark on the screen is in front of Reports.
) button once to enter the Reports menu.
until the checkmark is in front of Menu Settings Page.
once. The printer should display Printing Menu Settings Page and the
) button.
) button to enter the printer