- ページ 13
ストレージ Fujitsu ETERNUS4000' ETERNUS8000のPDF サーバー接続マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ETERNUS4000' ETERNUS8000 21 ページ。
ページを印刷する
Chapter 2 ETERNUS Disk Storage System Connection Settings
>
2.1 Common Settings
2.1.2.3
Windows®
For Windows®, perform the settings detailed in
Table 2.6
Windows Server® 2008
Windows Server® 2008 R2
Windows Server® 2003
When a Windows® server and ETERNUS Disk storage system are connected via a single path
connection using an ETERNUS Multipath Driver, set the host response Sense Data Conversion
Pattern to [No Conversion].
If connection is performed without using an ETERNUS Multipath Driver, set the host response
Sense Data Conversion Pattern to [Windows Recommended (When not using GR/ETERNUS
MPD or Device Driver)].
Table 2.7
Windows Server® 2008
Windows Server® 2008 R2
Windows Server® 2003
2.1.2.4
Linux
For Linux, perform the settings detailed in
Table 2.8
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
P3AM-4172-02ENZ0
Server Connection Guide (iSCSI) ETERNUS Disk Storage System Settings
Reservation Conflict Response for Test Unit Ready setting for Windows®
OS
MSCS or WSFC configuration
Normal Response (Default)
Sense Data Conversion Pattern setting for Windows®
OS
No Conversion
Sense Data Conversion Pattern setting for Linux
OS
No Conversion
(Default)
13
Table 2.6
and
Table
Conflict Response
ETERNUS Multipath Driver,
ETERNUS Device Driver
Used
Not used
Windows
Recommended
(When not using
(Default)
GR/ETERNUS MPD
or Device Driver)
Table
2.8.
ETERNUS Multipath Driver
Used
Not used
Linux Recommended
(When not using
GRMPD)
2.7.
All other configurations
Normal Response (Default)
msdsm
Windows
Recommended
(When not using
GR/ETERNUS MPD
or Device Driver)
—
device-mapper
Linux
Recommended
(When not using
GRMPD)
Copyright 2010 FUJITSU LIMITED