- ページ 14
ストレージ Fujitsu ETERNUS4000' ETERNUS8000のPDF サーバー接続マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ETERNUS4000' ETERNUS8000 21 ページ。
ページを印刷する
Chapter 2 ETERNUS Disk Storage System Connection Settings
>
2.1 Common Settings
2.1.2.5
VMware ESX
For VMware ESX, perform the settings detailed in
The required setting value depends on the ETERNUS Disk storage system model and the ver-
sion of ESX that is being used.
Table 2.9
VMware vSphere
(ESX 4.1, ESXi 4.1, ESX 4.0, ESXi 4.0)
VMware Infrastructure 3
(ESX 3.5, ESXi 3.5)
Table 2.10
VMware vSphere
(ESX 4.1, ESXi 4.1, ESX 4.0, ESXi 4.0)
VMware Infrastructure 3
(ESX 3.5, ESXi 3.5)
Table 2.11
VMware vSphere
(ESX 4.1, ESXi 4.1, ESX 4.0, ESXi 4.0)
VMware Infrastructure 3
(ESX 3.5, ESXi 3.5)
For ETERNUS4000 models 400 and 600, and for ETERNUS8000 models 800, 1200, and 2200,
the settings detailed in
Table 2.12
VMware vSphere
(ESX 4.1, ESXi 4.1, ESX 4.0, ESXi 4.0)
When connecting a Windows®-based VMware VCB Proxy server to the ETERNUS Disk storage
system, and the LUNs are shared between the VMware VCB Proxy server and VMware ESX
server, the settings detailed in
Table 2.13
VMware vSphere
(ESX 4.1, ESXi 4.1, ESX 4.0,
ESXi 4.0)
VMware Infrastructure 3
(ESX 3.5, ESXi 3.5)
P3AM-4172-02ENZ0
Server Connection Guide (iSCSI) ETERNUS Disk Storage System Settings
Inquiry Standard Data Version setting for VMware ESX
OS
Sense Data Conversion setting for VMware ESX
OS
Asymmetric/Symmetric Logical Unit Access setting for VMware ESX
OS
Table 2.12
should be used.
Data Transfer Timer setting for VMware ESX
OS
Table 2.13
Inquiry Standard Data Version setting for Windows®-based VMware VCB Proxy
server
OS
Windows Server® 2008
used as a VCB Proxy server
Windows Server® 2003
used as a VCB Proxy server
14
Table 2.9
to
Table
[Inquiry Standard Data Version] setting
Version 05 (Default)
Version 04
[Sense Data Conversion] setting
Linux Recommended (When not using GRMPD)
[Asymmetric/Symmetric Logical Unit Access] setting
ETERNUS4000
ACTIVE-ACTIVE /
PREFERRED_PATH
ACTIVE / ACTIVE (Default)
[Data Transfer Timer] setting (sec.)
and
Table 2.14
should be used.
[Inquiry Standard Data Version] setting
2.12.
ETERNUS8000
ACTIVE / ACTIVE
(Default)
20
Version 05 (Default)
Version 04
Copyright 2010 FUJITSU LIMITED