- ページ 15

ストレージ Fujitsu ETERNUS4000' ETERNUS8000のPDF サーバー接続マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ETERNUS4000' ETERNUS8000 21 ページ。

ページを印刷する

Fujitsu ETERNUS4000' ETERNUS8000 サーバー接続マニュアル

Chapter 2 ETERNUS Disk Storage System Connection Settings

2.1 Common Settings

Table 2.14

VMware vSphere

(ESX 4.1, ESXi 4.1, ESX 4.0,

ESXi 4.0)

VMware Infrastructure 3

(ESX 3.5, ESXi 3.5)

2.1.3

Setting the Server iSCSI Host

storage system. At the same time, set the Host Response No. registered in

Host Responses" (page

Registering the IP addresses and setting up Host-Affinity Groups in

Allocating LUN Groups (Setting Host-Affinity Groups)" (page 15)

servers are allowed to access which ETERNUS Disk storage system LUNs.

See "Set iSCSI Host" of "ETERNUSmgr User Guide" for details.

2.1.4

Setting the Server Accessible LUN Groups (Setting Affinity Groups)

Create the server accessible LUN groups (Affinity Groups).

See "Set Affinity Group" of "ETERNUSmgr User Guide" for details.

2.1.5

Creating and Allocating LUN Groups (Setting Host-Affinity Groups)

Define the relationship between the server to be connected to the iSCSI port of the ETERNUS

Disk storage system and the created Affinity Group. This sets access restrictions to the

ETERNUS Disk storage system from each server.

See "Allocate Host-Affinity Group" of "ETERNUSmgr User Guide" for details.

P3AM-4172-02ENZ0

Server Connection Guide (iSCSI) ETERNUS Disk Storage System Settings

Host Specific Mode setting for Windows®-based VMware VCB Proxy server

Windows Server® 2008

used as a VCB Proxy server

Windows Server® 2003

used as a VCB Proxy server

12).

When the server OS is HP-UX, Windows®, Linux, or VMware ESX, assign

the Affinity Groups starting from LUN0 and continuing in ascending order.

The server cannot recognize the ETERNUS Disk storage system LUNs

unless they are assigned in this order.

This restriction does not apply when the server is running a Solaris OS.

•

When setting a LUN that has the same configuration for multiple iSCSI

paths for recognition, define the same Affinity Group.

•

If the one-to-one relationship between IP addresses and LAN cards

cannot be determined, the Host-Affinity Group settings may not be

performed correctly.

In this case, trying various settings may be necessary until the server is

able to recognize the ETERNUS Disk storage system logical disks.

[Host Specific Mode] setting

VMware Mode

Normal Mode (Default)

"2.1.2 Setting the

"2.1.5 Creating and

allows limits to be set on which