- ページ 17

ストレージ Fujitsu ETERNUS4000' ETERNUS8000のPDF サーバー接続マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ETERNUS4000' ETERNUS8000 21 ページ。

ページを印刷する

Fujitsu ETERNUS4000' ETERNUS8000 サーバー接続マニュアル

Chapter 2 ETERNUS Disk Storage System Connection Settings

2.2 OS Specific Settings

2.2

OS Specific Settings

Some settings are not required for some OSes and/or connection configurations.

Check the various cases described below, and perform any required settings.

2.2.1

Setting the CA Reset Groups

If the system configuration matches any of the items "System configuration that requires the

reset group setting" in the following table, every ETERNUS Disk storage system iSCSI port that

connects to the given server's access paths must be assigned to the same reset group.

For system configurations other than the following, use the default settings.

Windows Server® 2003

VMware vSphere 4 (ESX 4.0)

VMware Infrastructure 3

( ESX 3.5, ESXi 3.5)

*1:

For a Windows Server® 2008 or Windows Server® 2008 R2 based WSFC configuration, the reset

group settings are not necessary.

*2:

When multiple ESX servers share ETERNUS Disk storage system LUNs, any ETERNUS Disk storage

system iSCSI port that connects a shared LUN to an ESX server must be assigned to the same reset

group, whether multi-paths are used for the ESX servers or not.

P3AM-4172-02ENZ0

Server Connection Guide (iSCSI) ETERNUS Disk Storage System Settings

Server OS

Example:When multiple ESX servers share ETERNUS Disk storage system LUNs, CM#0 Port#1

and CM#1 Port#1 must be assigned to the same reset group, even for single-path

configurations.

Server#1

HBA#1

LAN switch#1

LAN switch#2

CM#0

Port#1

Affinity-Group

System configuration that requires the reset group setting

•

MSCS configuration (*1)

•

Multipath configuration

•

Multiple ESX servers share ETERNUS Disk storage

system LUNs (*2)

Server#2

HBA#1

CM#1

Port#1