- ページ 5

配管製品 Kohler 10EKDのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Kohler 10EKD 17 ページ。
Kohler 10EKD にも：インストレーション・インストラクション (4 ページ)

Install the relay in the junction box.

6.1

Use a 5/16 in. socket, 1/4 in. drive to remove the

junction box cover.

6.2

Place a rag inside the junction box to catch any

filings.

6.3

Drill a 3/16 in. hole at the location shown in

Figure 11.

6.4

Remove the rag and any drill filings from inside of

the junction box.

6.5

Mount the relay (GM49746) at the location shown

in Figure 12 using a screw (X-50-1) and nut

(X-70-3).

6.6

Connect the relay-connector end of the new wiring

harness (GM90471) to the new relay (GM49746).

6.7

Use a 5/16 in socket, 1/4 in. drive to reinstall the

junction box cover.

inch

1. 3/16 in. hole

(1 in. down from top edge and 1 in. over from pem stud)

Figure 11 Hole Location for Relay (Inside Junction

Box)

TT-1617

12/13

GM40265-D

1. Relay (GM49746), screw (X-50-1), and nut (X-70-3)

Figure 12 Relay Location (Inside Junction Box)

GM40265-D