- ページ 5

計測機器 Aqua Medic pH controllerのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Aqua Medic pH controller 20 ページ。
Aqua Medic pH controller にも：操作マニュアル (14 ページ)

1. Theory

The pH value is an electric value that is a parameter for the acidity of water.

2. Delivery

Aqua Medic pH monitor

pH electrode with BNC-connection

Buffer solution pH 7

Buffer solution pH 4

Allen key

Fig. 1: pH monitor with pH electrode

1. Display

2. Calibration knob, pH 7

3. Calibration knob, pH 4

4. Connection for electrode (BNC-plug)

5. 12 V socket

6. pH electrode

3. Starting and calibration

1. Put the 12 V plug of the power supply unit into the socket of the pH monitor (No. 5) and then

plug the power supply unit into the power socket.

2. Connect the pH electrode (No. 4).

3. Insert the electrode into the buffering solution pH 7. After the measured value has itself

stabilized, which may take some time, turn the knob (No. 2) with the included Allen key to pH 7

with a small turn of the knob. Carefully insert the Allen key with the short side. Do not turn

knob when pulling the Allen key out.

4. Flush electrode with distilled water.