Aqua Medic pH controller 운영 매뉴얼 - 페이지 5

{카테고리_이름} Aqua Medic pH controller에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Medic pH controller 20 페이지.
Aqua Medic pH controller에 대해서도 마찬가지입니다: 운영 매뉴얼 (14 페이지)

페이지 인쇄

1. Theory

The pH value is an electric value that is a parameter for the acidity of water.

2. Delivery

Aqua Medic pH monitor

pH electrode with BNC-connection

Buffer solution pH 7

Buffer solution pH 4

Allen key

Fig. 1: pH monitor with pH electrode

1. Display

2. Calibration knob, pH 7

3. Calibration knob, pH 4

4. Connection for electrode (BNC-plug)

5. 12 V socket

6. pH electrode

3. Starting and calibration

1. Put the 12 V plug of the power supply unit into the socket of the pH monitor (No. 5) and then

plug the power supply unit into the power socket.

2. Connect the pH electrode (No. 4).

3. Insert the electrode into the buffering solution pH 7. After the measured value has itself

stabilized, which may take some time, turn the knob (No. 2) with the included Allen key to pH 7

with a small turn of the knob. Carefully insert the Allen key with the short side. Do not turn

knob when pulling the Allen key out.

4. Flush electrode with distilled water.