- ページ 7

セキュリティシステム AVS Electronics VECTOR PlusのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。AVS Electronics VECTOR Plus 12 ページ。 Bidirectional gsm interface

GSM engine connection

Modulo
GSM engine
GSM
Connect the GSM engine to 30 pin female connector.

Plugging in sim card / antenna jack

A
B
Ingresso connettore antenna
Input antenna jack
SW1
PROG.
RESET
PB2
S1
S2
RV5
F1 F3.15A L250V
F2 F3.15A L250V
BATT.
GSM engine with upper side SIM Card holder:
1. Press pushbutton A.
2. Extract B holder.
3. Put SIM card on B.
4. Insert B holder all the way long into its receptacle.
C
GSM engine with right side SIM Card holder:
To insert SIM Card:
1. Insert SIM Card completely into slot C until it clicks inside
the module
To remove SIM Card:
1. Press and release the SIM Card to cause it to be ejected
through the slot.
RV1
RV2 RV3
RV4
TAMPER
PB1
S3
1
2
3
T
T
Ac
Bc
A B
GSM
OUT STATE
TAMPER
CENTR.
Antenna jack:
Place the male connector of the antenna
cable into the female one of the module
and apply slight pressure in the axis
direction to click it into the module. Do not
force or bend the cable sideway. To
remove the cable, hold the connector with
the fingertips and pull avoiding bending it
sideway. Do not pull the cable.

Display module connection

Remove power from the interface and
insert the display module into the proper
connectors as indicated in the figure.
7
Ac
Bc
A
B
CENTR.