- ページ 10

ストレージ Dell PowerEdge 5160のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerEdge 5160 28 ページ。 Installing the external drive bay
Dell PowerEdge 5160 にも：インストレーション・マニュアル (42 ページ), インストレーション・マニュアル (20 ページ), 更新マニュアル (8 ページ), 情報更新 (8 ページ), ユーザーマニュアル (42 ページ), ラックの設置 (34 ページ), ハードウェア・インストール・マニュアル (40 ページ), インストレーション・マニュアル (36 ページ)

1-4

Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide

Removing the Doors From a 24-U or 42-U Rack

You must remove the doors from the rack to provide access to the interior of the

rack and to prevent damage to the doors while installing the kit. To remove the doors,

perform the following steps.

CAUTION: To prevent personal injury due to the size and weight of the

doors, never attempt to remove the doors by yourself.

Open the latch on the front door (see Figure 1-2).

Slide the latch's push-button cover up as far as it will go, press the push button,

rotate the handle clockwise until the latch releases, and then pull the door open.

Remove the front door of the rack.

If you have a 42-unit (U [1.75 inches]) rack, perform the following steps

(see Figure 1-3):

One person should grasp the top of the door to stabilize it. The other person

should grasp the bottom of the door.

The person holding the bottom of the door should press the release lever on

the bottom hinge and then pull the bottom of the door away from the rack a

few inches.

The person holding the top of the door should press the release lever on the

top hinge and then pull the door away from the rack.

push-button

cover

push button

handle