- ページ 15
ストレージ Dell PowerVault MD3220i SeriesのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerVault MD3220i Series 18 ページ。 Storage arrays
Dell PowerVault MD3220i Series にも： 配備マニュアル (41 ページ), 更新マニュアル (32 ページ), ラック取り付け説明書 (2 ページ), 情報更新 (1 ページ), テクニカルマニュアルブック (38 ページ), マニュアル (16 ページ)
ページを印刷する
Troubleshooting the SMI-S Provider
Table 4-1 lists some of the common issues and their resolutions.
Table 4-1. Common Issues and Resolutions
Issue
The following message is displayed if
SMI-S Provider is installed on a system
that previously did not have the API:
cimserver not started: Bind
failed: Failed to bind socket
on port 5989: Address already
in use (error code 125).
CIMOM default port in use is not
reported on Windows.
Service Location Protocol Service Agents
(SLP SA) in multi-CIMOM
environments.
Recommended Action
This issue occurs when there is a port
conflict. To resolve the conflict, remove
the application that is using the port or
select a different port.
To select a different port:
Stop the CIM server.
1
Set the new ports.
2
cimconfig -s httpPort=<HTTP
PORT> -p
cimconfig -s httpsPort=
<HTTPS PORT> -p
Start the CIM server.
3
In Windows, if the default ports 5988 and
5989 are already in use during provider
installation, no message is displayed to
state that the ports are in use.
To resolve the conflict:
Edit the cimserver_current.conf and
1
cimserver_planned.conf files.
Specify the open ports.
2
Start the CIM server.
3
Only one SLP SA per individual server
can be active because SAs require the
fixed port 477.
NOTE:
If the operation started on a
non-standard port, dynamic SLP discovery
of the CIM service is not be possible.
Troubleshooting the SMI-S Provider
4
15