Dell PowerVault MD3220i Series Installatiehandleiding - Pagina 15

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dell PowerVault MD3220i Series. Dell PowerVault MD3220i Series 18 pagina's. Storage arrays
Ook voor Dell PowerVault MD3220i Series: Uitrolhandleiding (41 pagina's), Handleiding bijwerken (32 pagina's), Instructies voor installatie van het rek (2 pagina's), Informatie-update (1 pagina's), Technisch handboek (38 pagina's), Handmatig (16 pagina's)

Pagina afdrukken
Dell PowerVault MD3220i Series Installatiehandleiding

Troubleshooting the SMI-S Provider

Table 4-1 lists some of the common issues and their resolutions.
Table 4-1. Common Issues and Resolutions
Issue
The following message is displayed if
SMI-S Provider is installed on a system
that previously did not have the API:
cimserver not started: Bind
failed: Failed to bind socket
on port 5989: Address already
in use (error code 125).
CIMOM default port in use is not
reported on Windows.
Service Location Protocol Service Agents
(SLP SA) in multi-CIMOM
environments.
Recommended Action
This issue occurs when there is a port
conflict. To resolve the conflict, remove
the application that is using the port or
select a different port.
To select a different port:
Stop the CIM server.
1
Set the new ports.
2
cimconfig -s httpPort=<HTTP
PORT> -p
cimconfig -s httpsPort=
<HTTPS PORT> -p
Start the CIM server.
3
In Windows, if the default ports 5988 and
5989 are already in use during provider
installation, no message is displayed to
state that the ports are in use.
To resolve the conflict:
Edit the cimserver_current.conf and
1
cimserver_planned.conf files.
Specify the open ports.
2
Start the CIM server.
3
Only one SLP SA per individual server
can be active because SAs require the
fixed port 477.
NOTE:
If the operation started on a
non-standard port, dynamic SLP discovery
of the CIM service is not be possible.
Troubleshooting the SMI-S Provider
4
15