Dell PowerVault MD3220i Series Instrukcja instalacji - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przechowywanie Dell PowerVault MD3220i Series. Dell PowerVault MD3220i Series 18 stron. Storage arrays
Również dla Dell PowerVault MD3220i Series: Podręcznik wdrażania (41 strony), Aktualizacja instrukcji (32 strony), Instrukcja instalacji stojaka (2 strony), Aktualizacja informacji (1 strony), Podręcznik techniczny (38 strony), Podręcznik (16 strony)

Drukuj stronę
Dell PowerVault MD3220i Series Instrukcja instalacji

Troubleshooting the SMI-S Provider

Table 4-1 lists some of the common issues and their resolutions.
Table 4-1. Common Issues and Resolutions
Issue
The following message is displayed if
SMI-S Provider is installed on a system
that previously did not have the API:
cimserver not started: Bind
failed: Failed to bind socket
on port 5989: Address already
in use (error code 125).
CIMOM default port in use is not
reported on Windows.
Service Location Protocol Service Agents
(SLP SA) in multi-CIMOM
environments.
Recommended Action
This issue occurs when there is a port
conflict. To resolve the conflict, remove
the application that is using the port or
select a different port.
To select a different port:
Stop the CIM server.
1
Set the new ports.
2
cimconfig -s httpPort=<HTTP
PORT> -p
cimconfig -s httpsPort=
<HTTPS PORT> -p
Start the CIM server.
3
In Windows, if the default ports 5988 and
5989 are already in use during provider
installation, no message is displayed to
state that the ports are in use.
To resolve the conflict:
Edit the cimserver_current.conf and
1
cimserver_planned.conf files.
Specify the open ports.
2
Start the CIM server.
3
Only one SLP SA per individual server
can be active because SAs require the
fixed port 477.
NOTE:
If the operation started on a
non-standard port, dynamic SLP discovery
of the CIM service is not be possible.
Troubleshooting the SMI-S Provider
4
15