- ページ 17

スイッチ Dell S4248FB-ONのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dell S4248FB-ON 47 ページ。 S4200-on series
Dell S4248FB-ON にも： セットアップマニュアル (29 ページ)

ページを印刷する
Dell S4248FB-ON インストレーション・マニュアル
Figure 6. GND lug assembly
1
Remove the two installed M3 screws from the lower-left side of your switch.
NOTE:
Keep these screws.
2
Remove the bracket assembly from the shipping bag.
3
Clean the bracket and lug surfaces thoroughly and apply an anti-oxidant solution to the mating surfaces.
4
Attach the switch ground using the
5
Using the two removed screws, attach the GND lug bracket assembly to your switch, as shown.
Torque the M3 screws to ±4-5 in-lbs.
Figure 7. Attach the GND lug assembly
Ground cable
instructions.
NEBS compliance
17