Dell S4248FB-ON 설치 매뉴얼 - 페이지 17
{카테고리_이름} Dell S4248FB-ON에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell S4248FB-ON 47 페이지. S4200-on series
Dell S4248FB-ON에 대해서도 마찬가지입니다: 설정 매뉴얼 (29 페이지)
페이지 인쇄
Figure 6. GND lug assembly
1
Remove the two installed M3 screws from the lower-left side of your switch.
NOTE:
Keep these screws.
2
Remove the bracket assembly from the shipping bag.
3
Clean the bracket and lug surfaces thoroughly and apply an anti-oxidant solution to the mating surfaces.
4
Attach the switch ground using the
5
Using the two removed screws, attach the GND lug bracket assembly to your switch, as shown.
Torque the M3 screws to ±4-5 in-lbs.
Figure 7. Attach the GND lug assembly
Ground cable
instructions.
NEBS compliance
17