- ページ 12

デスクトップ HP 2133のPDF 基本設定をオンラインで閲覧またはダウンロードできます。HP 2133 14 ページ。 Hp compaq presario,presario 2100: network guide
HP 2133 にも：仕様 (27 ページ), ユーザーマニュアル (25 ページ), ユーザーマニュアル (20 ページ), マルチブート・ユーザー・マニュアル (17 ページ), メンテナンス・マニュアル (14 ページ), ユーザーマニュアル (39 ページ), 使用済み製品の分解手順 (34 ページ)

■

If you have antivirus software installed on your computer, run the virus scan. Refer to

the antivirus software Help for more details.

The computer is on but is not responding

If the computer is on but is not responding to software or keyboard commands, try the

following emergency shutdown procedures in the sequence provided, until shutdown occurs:

CAUTION: Emergency shutdown procedures will result in the loss of unsaved information.

1. Press and hold the power switch on the computer for at least 5 seconds.

2. Disconnect the computer from external power and remove the battery.

It is normal for the computer to feel warm to the touch while it is in use. But if the computer

feels unusually warm, it may be overheating because a vent is blocked.

If you suspect that the computer is overheating, turn off the computer to allow the computer

to cool to room temperature. Then be sure to keep all vents free from obstructions while you

are using the computer.

WARNING: To reduce the possibility of heat-related injuries or of overheating the computer,

do not place the computer directly on your lap or obstruct the computer air vents. Use the

computer only on a hard, flat surface. Do not allow another hard surface, such as an

adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block

airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as

pillows or rugs or clothing, during operation. The computer and the AC adapter comply

with the user-accessible surface temperature limits defined by the International Standard for

Safety of Information Technology Equipment (IEC 60950).

✎

The fan in the computer starts up automatically to cool internal components and prevent

overheating. It is normal for the internal fan to cycle on and off during routine

operation.

Follow these suggestions if an external device does not function as expected:

■

Turn on the device according to the manufacturer's instructions.

■

Be sure that all device connections are secure.

■

Be sure that the device is receiving electrical power.

■

Be sure that the device, especially if it is older, is compatible with the operating system.

■

Be sure that the correct drivers are installed and updated.

Getting Started

Product Information and Troubleshooting