- ページ 33

デスクトップ HP 8100 - Elite Convertible Minitower PCのPDF 設定・構成マニュアルをオンラインで閲覧またはダウンロードできます。HP 8100 - Elite Convertible Minitower PC 48 ページ。 Hp compaq convertible minitower business pc
HP 8100 - Elite Convertible Minitower PC にも：仕様 (2 ページ), クイックセットアップとスタートマニュアル (21 ページ), サポート一覧 (34 ページ), ソフトウェア設定マニュアル (9 ページ), 図解パーツ＆サービスマップ (4 ページ)

Default Setting

Recommended Setting

b. Idle Timeout

Default Setting

Recommended Setting

This option sets the timeout value for Wake-On-ME.

The default timeout value is 65535 from the factory and it is in units of a

minute. A value of 0 means the Wake-On-ME feature is disabled and the

ME will not go to sleep when not being used in a non-active system. HP

recommends a setting of 65535 for most applications. . Certain console

vendor's product falsely detect an AMT system as disconnected if the

software has to wait for the ME to wake and respond. If the console

software being used does not have this issue, HP recommends a setting of

1 which allows the ME to go to sleep after approximately 1 minute of

inactivity. This allows for maximum power savings when the ME is enabled

to be on in S3, S4, or S5.

The timeout value can be set in decimal and hexadecimal notation. It must

be set to a non-zero value for the ME to take advantage of Wake-On-ME.

This value is not used when the system is in an active state – S0.

This value is used only if the ME ON in Host Sleep State setting is set to

allow ME WoL.

See Appendix C for an explanation of Wake-On-ME / ME WoL.

18) Go into AMT Configuration menu

Check the Manageability Feature Selection.

Default Setting

Recommended Setting

19) Check SOL/IDE-R under Intel AMT Configuration menu.

a. A message window telling the user that the system resets after configuration

will appear.

Select Y.

b. Username and Password

Default Setting

Recommended Setting

Select Enabled.

This option allows users and passwords to be added from the WebGUI. If

it is disabled, then only the administrator has MEBx remote access.

c. Serial Over LAN

Default Setting

Recommended Setting

Select Enabled.

: Desktop: ON in S0

: Desktop: ON is S0, ME Wake in S3, S4-5

: 65535

:65534

: Enabled