- ページ 4

照明器具 Dialight VigilantのPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。Dialight Vigilant 11 ページ。 Area light with battery backup
Dialight Vigilant にも：操作およびインストール手順 (6 ページ)

ページを印刷する

CAUTION: It is important to ensure that the application structure can support the weight of the luminaire.

Dialight is not responsible for damage to application structure or to luminaire, if mounted improperly.

Inspect the luminaire prior to installation for any physical defects.

If any physical defects are noticed, DO NOT install luminaire and contact a Dialight representative.

Mounting of Luminaire

Electrical Connections

Terminal Block Connection

12-20 AWG (4.0-0.5 mm

Page: 4 of 11

Vigilant® Bulkhead

(examples)

M20 or 3/4 NPT Cord Grip

10-11 mm (0.39"- 0.43")

)

Secure mounting bracket to luminaire

(refer to separate manual for mounting options)

WARNING: Removal or loosening of any of the Optical

Window hardware will void all warranties.

Unthread corner captive screws

CAUTION: DO NOT REMOVE HARDWARE

Feed source cable through cord grip

Strip source cable conductor jacket

Push down, insert source conductor and release.

Slight tug on source conductor to check engagement

WARNING:

Only single cable for each terminal entry point.

Dialight, 1501 Route 34 South, Farmingdale, NJ 07727 USA

Tel: +1 732.919.3119

Document # 9100127225199 / Rv.D 79747

Fax: +1 732.751.5778