Dialight Vigilant Manual de instruções de instalação e funcionamento - Página 4
Procurar online ou descarregar pdf Manual de instruções de instalação e funcionamento para Equipamento de iluminação Dialight Vigilant. Dialight Vigilant 11 páginas. Area light with battery backup
Também para Dialight Vigilant: Instruções de funcionamento e instalação (6 páginas)
Imprimir páginaCAUTION: It is important to ensure that the application structure can support the weight of the luminaire.
Dialight is not responsible for damage to application structure or to luminaire, if mounted improperly.
Inspect the luminaire prior to installation for any physical defects.
If any physical defects are noticed, DO NOT install luminaire and contact a Dialight representative.
Mounting of Luminaire
Electrical Connections
Terminal Block Connection
12-20 AWG (4.0-0.5 mm
Page: 4 of 11
Vigilant® Bulkhead
(examples)
M20 or 3/4 NPT Cord Grip
10-11 mm (0.39"- 0.43")
2
)
Secure mounting bracket to luminaire
(refer to separate manual for mounting options)
WARNING: Removal or loosening of any of the Optical
Window hardware will void all warranties.
Unthread corner captive screws
CAUTION: DO NOT REMOVE HARDWARE
Feed source cable through cord grip
Strip source cable conductor jacket
Push down, insert source conductor and release.
Slight tug on source conductor to check engagement
WARNING:
Only single cable for each terminal entry point.
Dialight, 1501 Route 34 South, Farmingdale, NJ 07727 USA
Tel: +1 732.919.3119
Document # 9100127225199 / Rv.D 79747
Fax: +1 732.751.5778
www.dialight.com