Dialight Vigilant 설치 및 운영 지침 매뉴얼 - 페이지 4
{카테고리_이름} Dialight Vigilant에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dialight Vigilant 11 페이지. Area light with battery backup
Dialight Vigilant에 대해서도 마찬가지입니다: 작동 및 설치 지침 (6 페이지)
페이지 인쇄CAUTION: It is important to ensure that the application structure can support the weight of the luminaire.
Dialight is not responsible for damage to application structure or to luminaire, if mounted improperly.
Inspect the luminaire prior to installation for any physical defects.
If any physical defects are noticed, DO NOT install luminaire and contact a Dialight representative.
Mounting of Luminaire
Electrical Connections
Terminal Block Connection
12-20 AWG (4.0-0.5 mm
Page: 4 of 11
Vigilant® Bulkhead
(examples)
M20 or 3/4 NPT Cord Grip
10-11 mm (0.39"- 0.43")
2
)
Secure mounting bracket to luminaire
(refer to separate manual for mounting options)
WARNING: Removal or loosening of any of the Optical
Window hardware will void all warranties.
Unthread corner captive screws
CAUTION: DO NOT REMOVE HARDWARE
Feed source cable through cord grip
Strip source cable conductor jacket
Push down, insert source conductor and release.
Slight tug on source conductor to check engagement
WARNING:
Only single cable for each terminal entry point.
Dialight, 1501 Route 34 South, Farmingdale, NJ 07727 USA
Tel: +1 732.919.3119
Document # 9100127225199 / Rv.D 79747
Fax: +1 732.751.5778
www.dialight.com