- ページ 3

デジタルカメラ Panasonic AW-HS50 SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Panasonic AW-HS50 Series 6 ページ。 Combining pinp
Panasonic AW-HS50 Series にも：マニュアル (20 ページ), パンフレット＆スペック (4 ページ), マニュアル (4 ページ), マニュアル (2 ページ), クイック・スタート・マニュアル (4 ページ)

② Set the information for connection with AW-HS50.

Menu: (10) SYSTEM > [3] SW CTL => [Network]

③ Enable the link with AW-HS50

Menu: (9) SETUP > [2] SW LINK => [On]

When the above configuration of AW-HS50 and AW-RP50 is completed, "LINK" lamp on AW-HS50 Control Panel –

(Fig.4) lights up in green and the linked-up functions are ready for use.

(Figure 4: AW-HS50 Control Panel)

④ Set up the remote cameras to correspond to the video inputs on AW-HS50.

(On AW-RP50, SDI IN 1 – 4 are indicated as INPUT1 – 4, DVI-IN as INPUT5.)

According to this set-up, if one of the cameras that have been set up is selected using AW-RP50, AW-HS50

receives the information of selection.

Menu: (10) SYSTEM > [4] SW ASSIGN => 1. INPUT1 – 5. INPUT5 => [CAM1 – CAM100]

* For example, if a video output from the remote camera connected to AW-RP50 [CAM10] is sent into AW-HS50

INPUT3, when the above menu setting is set to "3. INPUT3 => [CAM10]", the image will be switched by

selecting this camera.

* Default: [NoAsign]

* Default: [Off]