- ページ 9
ペットケア製品 EasyPet EP-380RのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。EasyPet EP-380R 19 ページ。 Easypet rechargeable multi-dog remote training system
To turn on the collar receiver
, short press the power button three times
repeatedly within 3 seconds, a RED light will come up each time when the button is
pressed down and go off when the button is released. The collar receiver will short
bleep once. The collar receiver is now turned on into working mode. It will respond
to the commands sent from the transmitter handset if it is matched up properly in
the selected dog channel.
To turn off the collar receiver
, short press the power button three times
repeatedly within 3 seconds, a GREEN light will come up each time when the button
is pressed down and go off when the button is released. The collar receiver will emit
a long beep once (for about 1 second). The collar receiver is now turned off into OFF
mode. It will not receive any commands from the transmitter handset.
To tell whether the collar receiver is ON or OFF
, simply short press the power
button once, if a green LED light comes up when the button is pressed, it means the
collar receiver is in working mode (ON). If a red LED light comes up when the button
is pressed, it means the collar receiver is in OFF mode (OFF).
You can also tell from the length of the beep to see whether the collar receiver is ON
or OFF. If the collar receiver gives a short beep when you are performing the turning
ON/OFF procedures manually, it means the collar receiver is turned on. If collar
receiver gives a longer beep when you are performing the turning ON/OFF
procedures manually, it means the collar receiver is turned off.
The average battery usage time for the collar receiver is about 3 to 5 days before it
needs a recharge. This will also depend on how often and what type of correction is
used on the collar receiver.
To achieve longer battery life, please turn off the collar receiver when it is not used.
If the system is not going to be used for a long period of time, please do the
following:
1. Fully charge both transmitter handset and collar receiver;
2. Switch both of them off properly;
3. Store them in a still and cool place.