EasyPet EP-380R 사용자 설명서 - 페이지 9

{카테고리_이름} EasyPet EP-380R에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. EasyPet EP-380R 19 페이지. Easypet rechargeable multi-dog remote training system

To turn on the collar receiver

, short press the power button three times

repeatedly within 3 seconds, a RED light will come up each time when the button is

pressed down and go off when the button is released. The collar receiver will short

bleep once. The collar receiver is now turned on into working mode. It will respond

to the commands sent from the transmitter handset if it is matched up properly in

the selected dog channel.

, short press the power button three times

repeatedly within 3 seconds, a GREEN light will come up each time when the button

is pressed down and go off when the button is released. The collar receiver will emit

a long beep once (for about 1 second). The collar receiver is now turned off into OFF

mode. It will not receive any commands from the transmitter handset.

, simply short press the power

button once, if a green LED light comes up when the button is pressed, it means the

collar receiver is in working mode (ON). If a red LED light comes up when the button

is pressed, it means the collar receiver is in OFF mode (OFF).

You can also tell from the length of the beep to see whether the collar receiver is ON

or OFF. If the collar receiver gives a short beep when you are performing the turning

ON/OFF procedures manually, it means the collar receiver is turned on. If collar

receiver gives a longer beep when you are performing the turning ON/OFF

procedures manually, it means the collar receiver is turned off.

The average battery usage time for the collar receiver is about 3 to 5 days before it

needs a recharge. This will also depend on how often and what type of correction is

used on the collar receiver.

To achieve longer battery life, please turn off the collar receiver when it is not used.

If the system is not going to be used for a long period of time, please do the

following:

1. Fully charge both transmitter handset and collar receiver;

2. Switch both of them off properly;

3. Store them in a still and cool place.