- ページ 13

ヒーター Dickinson NEWPORTのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dickinson NEWPORT 19 ページ。 Diesel heater
Dickinson NEWPORT にも：設置および操作マニュアル (10 ページ), 操作・設置マニュアル (16 ページ)

ページを印刷する

LIGHTING PROCEDURE

See Page 1 of manual

The first time the oil-metering valve is turned on it will take 5-10 minutes for the fuel lines to

fill and oil to appear in the bottom of the burner.

The burning characteristic of the flame during lighting is as follows :-

Lighting (Primed)

Low Fire (Turn oil valve back on to 1 setting before fire goes out)

THE FLAME MUST BURN ABOVE THE BURNER RING AT ALL TIMES FOR

CAUTION -

Preheating

The flame colour must be lemon yellow with no smoke

emitted. If the flame does not rise above the burner ring

when the oil metering valve is turned on increase the

setting until it does.

OPERATION TIP

SELECT VALVE SETTING AND, WITH THE COMBUSTION

ASSIST FAN, ADD AS MUCH AIR AS YOU CAN UNTIL

THE FLAME SINKS BELOW THE BURNER RING. THEN

BACK OFF THE FAN SPEED UNTIL THE FLAME IS

OUT OF THE BURNER.

EFFICIENT COMBUSTION

DO NOT LIGHT A HOT BURNER - DO NOT USE GASOLINE OR

OTHER HIGHLY FLAMMABLE MATERIAL TO START THE

BURNER

DO NOT LIGHT A FLOODED BURNER

Fuel Vaporizing

Priming Fuel

Burned