- ページ 9

バッテリーチャージャー AXITEC AXIbox 11KのPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。AXITEC AXIbox 11K 13 ページ。

Installationsanleitung AXIbox 11K

6.2 Setting the operating mode

The AXIbox has two operating modes. The changeover may only be carried out by a specialist, taking into

account all necessary safety precautions.

When delivered, the AXIbox is protected against unauthorised use by a lock. The charging process is started

by the RFID cards supplied. If this operating mode is desired, no changes need to be made.

In order to use the RFID cards to activate the charging process, the jumper marked in the above image must

be in the position shown. If the AXIbox was previously in Plug & Play mode, the jumper must be moved

back to the position shown above to switch to RFID mode.

6.2.2 Plug & Play

In Plug & Play mode, charging can be started after inserting the charging plug into the car's charging socket

without further activation. To switch to this mode, the jumper marked in the image below must be placed

in the position shown.

EN211103