- ページ 19

顕微鏡 Olympus FV3000のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Olympus FV3000 38 ページ。
Olympus FV3000 にも：安全マニュアル (16 ページ), 操作マニュアル (5 ページ)

Tips for Image Acquisition

■For the High speed scanning■

*Check whether [Scan Speed] is set "2.0μs/pixel".

１）Changing the scanner

＊Use the Resonant scanner

＊Use the Roundtrip Mode

When using High speed scanner, the signal gets weaker and the noise increases. So,

refer to [■For brighter imaging■] and [■For the lower noises■] and combine them.

２）Selecting the smaller image size

３）Reducing the scanning area

＊Use "Clip scan" to limit the acquiring area.

Scanning time is displayed in this line.

Pixel/Line/Frame

★High voltage correction: This mode is the

function that the sensitivity is adjusted

automatically to keep brightness when

scan speed is changed.

■To make image more brighter■

４）Increasing laser intensity /

Increasing sensitivity(HV)

※If suﬃcient brightness cannot be obtained

even when the sensitivity(HV) increased to 600V or higher,

combine another method in additional to this method.

５）Increasing the C.A.

※When increasing the C.A., the Z-axis resolution gets worse.

６）Slowing down the scan speed

※Select "OFF" in [High voltage correction].

■To lower the noise level■

７）Using Average

This method averages specified number of images during image acquisition.

Select the "Line" or "Frame" and

enter the number of image to be averaged.

８）Slowing down the scan speed

※Select "ON" in [High voltage correction].

＊