- ページ 4

コントローラー ABB Jocab Safety Vital 2のPDF 操作説明をオンラインで閲覧またはダウンロードできます。ABB Jocab Safety Vital 2 11 ページ。 Safety controller
ABB Jocab Safety Vital 2 にも： マニュアル (14 ページ)

ページを印刷する
ABB Jocab Safety Vital 2 操作説明

Time delay

Output group 2 can be off-delayed by connecting the inputs 0.5s and 1.0s to +24V. The system is
binary so connection of one of these inputs adds the corresponding time.
Connecting 0.5s = 0.5 sec. delay
Connecting 1.0s = 1.0 sec. delay
Connecting both 0.5s and 1.0s = 1.5 sec. delay

Mode selection

Both Vital 2 and Vital 3 can be set to work in one of the three modes M1, M2 or M3. Selection of
mode is done by connecting one of the terminals marked M1, M2 or M3 to +24V.
The following pictures show the logic for each mode of operation.
4
Vital2&3_Manual_v1D
www.jokabsafety.com