ABB Jocab Safety Vital 2 작동 지침 - 페이지 4

{카테고리_이름} ABB Jocab Safety Vital 2에 대한 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB Jocab Safety Vital 2 11 페이지. Safety controller
ABB Jocab Safety Vital 2에 대해서도 마찬가지입니다: 매뉴얼 (14 페이지)

페이지 인쇄
ABB Jocab Safety Vital 2 작동 지침

Time delay

Output group 2 can be off-delayed by connecting the inputs 0.5s and 1.0s to +24V. The system is
binary so connection of one of these inputs adds the corresponding time.
Connecting 0.5s = 0.5 sec. delay
Connecting 1.0s = 1.0 sec. delay
Connecting both 0.5s and 1.0s = 1.5 sec. delay

Mode selection

Both Vital 2 and Vital 3 can be set to work in one of the three modes M1, M2 or M3. Selection of
mode is done by connecting one of the terminals marked M1, M2 or M3 to +24V.
The following pictures show the logic for each mode of operation.
4
Vital2&3_Manual_v1D
www.jokabsafety.com