ページを印刷する
Tools & Materials Needed –
MIS CFS System, ink, and a working Epson 1400 printer
•
Ruler or measuring tape
•
Pair of scissors
•
Alcohol and some paper towels
•
Flat tip screw driver
•
OEM Cartridges (For testing printer)
•
Some paper to print on
•
Step 1
If you purchased your system prefilled, go to Step 2. If you purchased an empty CFS unit,
then vacuum fill the cartridges with the ink that came with the system or the ink of your
choice. Follow the instructions that are included with the vacuum pump, go to the pages
near the end of this document. When this is complete, go to Step 2.
Step 2
On the printer, push the Ink button to move the cartridges to the Replacement position.
While in this position, pull the power plug out of the wall. Next, remove the cartridges.
The cartridges ride in a black cartridge carriage and are secured by a gray cover that
must be raised in order to remove the cartridges.
S a v e
M o n e y
MIS Associates Inc
http://www.inksupply.com
Tools needed
Ink Replacement Button
a n d
I m p r o v e
2901 Auburn Rd
Fax: 248-289-6013
Y o u r
Auburn Hills, MI 48326
Email: [email protected]
P r i n t i n g
800-445-8296