- ページ 5

スプレッダー Cresco 15SWのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cresco 15SW 16 ページ。 Fertilizer and salt spreader

Assembling your Cresco 25

Take the small cotterpin (8) and place it through

the hole on the outside of the other wheel.

Turn the hopper body and main frame (1) over

so that the spreader sits on its wheels and

backstand. Take the handle bar and slide it down

the two ends of the backstand.

Thread the four remaining bolts (6) through the

holes on the handle bar (4) and the back stand

(5).

Once in position, use the same plyers to split the

ends of the cotter pin (8) to hold the wheel in

place.

Align the holes on the handle bar and on the

back stand (5).

Take the bent end of the control rod (3) and

thread it through the hole at the back of the

pivot bracket. It should lock into place.