- ページ 6

スプレッダー Cresco 15SWのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cresco 15SW 16 ページ。 Fertilizer and salt spreader

Assembling your Cresco 25

Take the other end of the control rod (3) and

align it with the hole on the on/off mechanism of

the handle bar (4). Push the on/off lever all the

way to 20 and then hand tighten the screw.

If the application hole is fully open and the lever

is set at 20, tighten the screw so that the control

rod (3) is secure.

Make sure the slider at the bottom of the hopper is

fully open. You should see the entirety of the holes

or hole on the slide system. Insert both agitators,

with the smaller one going under the larger.