- ページ 35

スイッチ Cisco 3750 - Catalyst EMI SwitchのPDF インストールマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 3750 - Catalyst EMI Switch 47 ページ。 Catalyst 3750 series switches
Cisco 3750 - Catalyst EMI Switch にも：データシート (18 ページ), よくある質問 (10 ページ), 製品情報 (5 ページ), 製品サポート速報 (6 ページ), 製品概要 (25 ページ), 説明 (1 ページ), データシート (23 ページ), 製品サポート速報 (6 ページ), スタートマニュアル (27 ページ), データシート (23 ページ), スタートマニュアル (33 ページ)

Chapter 3

Switch Installation

Connecting the StackWise Cable to the StackWise

Ports

Step 1

Step 2

Step 3

Step 4

78-15136-01

Connect to the front-panel ports. See the

•

10/100/1000 Ports" section on page 3-42

Module" section on page 3-44

To use the CLI, enter commands at the Switch> prompt through the console port

by using a terminal program or through the network by using Telnet. For

configuration information, refer to the switch software configuration guide or the

switch command reference. To use CMS, go to the

Your Browser" section on page

Follow these steps to connect the StackWise cable to the StackWise ports:

Remove the dust covers from the StackWise cables and StackWise ports and store

them for future use.

Insert one end of the StackWise cable into the StackWise port at the back of the

switch.

Always use a Cisco approved StackWise cable to connect the switches.

Note

Use the window in the StackWise cable to align the connector correctly. Secure

the screws tightly.

Insert the other end of the cable into the connector of the other switch and secure

the screws tightly.

Removing and installing the StackWise cable can shorten its useful life.

Caution

Do not remove and insert the cable more often than is absolutely

necessary.

Connecting the StackWise Cable to the StackWise Ports

"Connecting to the 10/100 and

and the

to complete the installation.

1-13.

Catalyst 3750 Switch Hardware Installation Guide

"Connecting to a SFP

"Accessing the Switch from

3-35