Cisco 3750 - Catalyst EMI Switch Kurulum Manüelleri - Sayfa 35

Anahtar Cisco 3750 - Catalyst EMI Switch için çevrimiçi göz atın veya pdf Kurulum Manüelleri indirin. Cisco 3750 - Catalyst EMI Switch 47 sayfaları. Catalyst 3750 series switches
Ayrıca Cisco 3750 - Catalyst EMI Switch için: Veri Sayfası (18 sayfalar), SSS (10 sayfalar), Ürün Bülteni (5 sayfalar), Ürün Destek Bülteni (6 sayfalar), Ürüne Genel Bakış (25 sayfalar), Açıklama (1 sayfalar), Veri Sayfası (23 sayfalar), Ürün Destek Bülteni (6 sayfalar), Başlangıç Kılavuzu (27 sayfalar), Veri Sayfası (23 sayfalar), Başlangıç Kılavuzu (33 sayfalar)

Cisco 3750 - Catalyst EMI Switch Kurulum Manüelleri
Chapter 3
Switch Installation
Connecting the StackWise Cable to the StackWise
Ports
Step 1
Step 2
Step 3
Step 4
78-15136-01
Connect to the front-panel ports. See the
10/100/1000 Ports" section on page 3-42
Module" section on page 3-44
To use the CLI, enter commands at the Switch> prompt through the console port
by using a terminal program or through the network by using Telnet. For
configuration information, refer to the switch software configuration guide or the
switch command reference. To use CMS, go to the
Your Browser" section on page
Follow these steps to connect the StackWise cable to the StackWise ports:
Remove the dust covers from the StackWise cables and StackWise ports and store
them for future use.
Insert one end of the StackWise cable into the StackWise port at the back of the
switch.
Always use a Cisco approved StackWise cable to connect the switches.
Note
Use the window in the StackWise cable to align the connector correctly. Secure
the screws tightly.
Insert the other end of the cable into the connector of the other switch and secure
the screws tightly.
Removing and installing the StackWise cable can shorten its useful life.
Caution
Do not remove and insert the cable more often than is absolutely
necessary.
Connecting the StackWise Cable to the StackWise Ports
"Connecting to the 10/100 and
and the
to complete the installation.
1-13.
Catalyst 3750 Switch Hardware Installation Guide
"Connecting to a SFP
"Accessing the Switch from
3-35