Cisco 3750 - Catalyst EMI Switch 설치 매뉴얼 - 페이지 35

{카테고리_이름} Cisco 3750 - Catalyst EMI Switch에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 3750 - Catalyst EMI Switch 47 페이지. Catalyst 3750 series switches
Cisco 3750 - Catalyst EMI Switch에 대해서도 마찬가지입니다: 데이터시트 (18 페이지), 자주 묻는 질문 (10 페이지), 제품 게시판 (5 페이지), 제품 지원 게시판 (6 페이지), 제품 개요 (25 페이지), 설명 (1 페이지), 데이터시트 (23 페이지), 제품 지원 게시판 (6 페이지), 시작하기 매뉴얼 (27 페이지), 데이터시트 (23 페이지), 시작하기 매뉴얼 (33 페이지)

Chapter 3

Switch Installation

Connecting the StackWise Cable to the StackWise

Ports

Step 1

Step 2

Step 3

Step 4

78-15136-01

Connect to the front-panel ports. See the

•

10/100/1000 Ports" section on page 3-42

Module" section on page 3-44

To use the CLI, enter commands at the Switch> prompt through the console port

by using a terminal program or through the network by using Telnet. For

configuration information, refer to the switch software configuration guide or the

switch command reference. To use CMS, go to the

Your Browser" section on page

Follow these steps to connect the StackWise cable to the StackWise ports:

Remove the dust covers from the StackWise cables and StackWise ports and store

them for future use.

Insert one end of the StackWise cable into the StackWise port at the back of the

switch.

Always use a Cisco approved StackWise cable to connect the switches.

Note

Use the window in the StackWise cable to align the connector correctly. Secure

the screws tightly.

Insert the other end of the cable into the connector of the other switch and secure

the screws tightly.

Removing and installing the StackWise cable can shorten its useful life.

Caution

Do not remove and insert the cable more often than is absolutely

necessary.

Connecting the StackWise Cable to the StackWise Ports

"Connecting to the 10/100 and

and the

to complete the installation.

1-13.

Catalyst 3750 Switch Hardware Installation Guide

"Connecting to a SFP

"Accessing the Switch from

3-35