- ページ 12
オール・イン・ワン・プリンター Sharp AR-5320のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Sharp AR-5320 20 ページ。 Mono laser copier/printer
Sharp AR-5320 にも: ソフトウェア・セットアップ・マニュアル (16 ページ), パンフレット&スペック (4 ページ)
[8] USER PROGRAMS
The user programs allow the parameters of certain functions to be set, changed, or canceled as desired.
1. List of user programs
This copier has the following user programs.
Program
Program name
Auto clear time
Preheat mode
Auto power shut-off timer
Stream feeding mode *
1
Auto power shut-off
setting
Auto paper select mode *
2
Auto tray switching *
2
Auditing mode
Account number entry
Account number change
Account number deletion
Number of copies per
account
Resetting account
Resolution in Auto/Text
mode
*1 On models with a SPF.
*2 On model with the two trays.
No
"Auto clear time" automatically returns the copy settings to the initial
settings when a certain period of time elapses after a copy is made.
This program is used to select the period of time. "Auto clear time"
1
can also be disabled.
This function automatically switches the machine to a low power
consumption state if the set duration of time elapses without the
machine being used when the power is on.
2
The POWER SAVE indicator lights up, however, the keys on the
operation panel can be used. Normal operation automatically
resumes when a key on the operation panel is pressed, a print job is
received or an original is placed.
This function automatically switches the machine to a state that
consumes even less power than preheat mode if the set duration of
time elapses without the machine being used when the power is on.
All lights except the POWER SAVE indicator and ON LINE indicator
3
go off. To resume normal operation, press the [START] key. Normal
operation also resumes automatically when a print job is received or
scanning is begun from a computer. While in auto power shut-off
mode, no keys (except the [START] key) can be used.
When copying using the SPF, during the period of time that the SPF
indicator blinks after an original has been scanned (about 5
4
seconds), a subsequent original can be placed and automatically
fed into the machine.
Use this setting to enable or disable auto power shut-off.
5
This function automatically selects paper that is the same size as
8
the original placed in the SPF, or the same size as that selected with
the [ORIGINAL SIZE ENTER] key. The function can be disabled.
If the paper runs out during printing and there is paper of the same
size and orientation in another tray, this function automatically
9
switches to that tray (excluding the bypass tray). The function can be
disabled.
Use to enable or disable "Auditing mode".
10
"Auditing mode" is initially disabled.
Use to set up account numbers.
11
Up to 20 accounts can be established.
12
Use to change an account number.
Use to delete an account number.
13
A single account number can be deleted, or all account numbers at
once.
This displays the number of copies made by each account.
14
The maximum count is 49,999. If this number is exceeded, the count
will start over from 0.
Use to reset the copy count of an account to 0.
15
The copy count of a single account or of all accounts can be reset.
This setting is used to change the copy resolution in AUTO and
TEXT mode from 600 x 300 dpi to 600 x 600 dpi
23
(high-quality mode).
Scanning is slower when high-quality mode is used.
AR-5316/5320 USER PROGRAMS 8-1
Description
Default
Parameters
1 (OFF)
2 (10sec)
3 (20sec)
60sec
4 (60sec)
5 (90sec)
6 (120sec)
1 (1min)
2 (5min)
3 (30min)
1min
4 (60min)
5 (120min)
6 (240min)
1 (5min)
2 (30min)
3 (60min)
5min
4 (120min)
5 (240min)
0 (OFF)
1 (ON)
OFF
0 (OFF)
ON
1 (ON)
0 (OFF)
ON
1 (ON)
0 (OFF)
1 (ON)
ON
0 (OFF)
OFF
1 (ON)
-
-
-
-
Delete
0 (Delete single account)
single
1 (Delete all accounts)
account
-
-
0 (Reset single account)
Reset single
account
1 (Reset all accounts)
1 (300dpi)
2 (600dpi)
300dpi