- ページ 13
オール・イン・ワン・プリンター Sharp AR-5320のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Sharp AR-5320 20 ページ。 Mono laser copier/printer
Sharp AR-5320 にも： ソフトウェア・セットアップ・マニュアル (16 ページ), パンフレット＆スペック (4 ページ)
ページを印刷する
Program
Program name
No
Key auto repeat
25
Key press time
26
Audible signals volume
27
Base setting beep signal
28
Number of copies limit
29
Use close paper size
30
Default tray setting
31
Default exposure mode
32
Description
Use this setting to select whether or not holding down a key causes
repeated input of the key. For keys that normally cause a set value to
increase when held down (for example, holding down the [ZOOM]
key), this program can be used to have the set value not change
when the key is held down.
Use this setting to select how long a key must be pressed for the
input to be accepted. By selecting a longer time, you can prevent
settings from being changed by the accidental pressing of a key.
This sets the volume of beep signals.
Use this to sound a beep when a base setting is selected.
Use this setting to select 99 or 999 for the maximum number of
copies.
When this function is enabled, printing in printer mode will
automatically continue using a different size of paper if the specified
size of paper runs out in all trays. This feature does not function in
copy mode.
Use this program to select a default tray. This tray is automatically
selected each time the power is turned on or each time the machine
reverts to the initial settings.
Use this program to set "AUTO", "TEXT", or "PHOTO" as the default
exposure mode.
AR-5316/5320 USER PROGRAMS 8-2
Default
Parameters
0 (OFF)
1 (ON)
ON
1 (Minimum
(current response speed))
Minimum
2 (0.5sec)
(current
response
3 (1.0sec)
speed)
4 (1.5sec)
5 (2.0sec)
1 (short beep)
short beep
2 (long beep)
3 (OFF)
0 (OFF)
OFF
1 (ON)
1 (99 copies)
999 copies
2 (999 copies)
0 (OFF)
1 (ON)
OFF
1 (Upper paper tray)
Upper
2 (Lower paper tray)
paper tray
5 (Bypass tray)
1 (AUTO)
AUTO
2 (TEXT)
3 (PHOTO)