- ページ 5

プロジェクター Sharp XG-PH50X - XGA DLP ProjectorのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Sharp XG-PH50X - XGA DLP Projector 13 ページ。 Xga native resolution system integration/large venue projector
Sharp XG-PH50X - XGA DLP Projector にも：インストレーション・マニュアル (2 ページ), 操作マニュアル (20 ページ), 仕様 (2 ページ), パンフレット＆スペック (4 ページ), クイック・スタート・リファレンス・シート (6 ページ)

INSTALLATION INSTRUCTIONS

FIGURE 3 ILLUSTRATION OF SINGLE BEAM CEILING BRACKET INSTALLATION

Sheetrock or lath

and plaster ceiling

DO NOT RUN THE AC POWER CORD THROUGH THE CEILING PLATE AND TRIM COVER

STEP 2. INSTALL THE CEILING MOUNT PLASTIC TRIM

2.1

The Access Hole (See Fig. 4) in the ceiling attachment plate is large enough to accommodate the molded connec-

tors commonly used the with projector.

2.2

Audio, Video and other low voltage connections may be passed through the access hole in the

ceiling plate and may also be passed through the plastic trim cover. There is a label (See Fig. 4) on

side of the plastic trim cover, adjacent to the center mounting bushing.

2.3

Select the contour appropriate for your application and cut out the opening along the line indicated

label. Use a very sharp cutting tool.

2.4

Thread the cable through the plastic trim cover. Place the plastic trim cover in place over the

ceiling plate and press the velcro tabs together.

FIGURE 4 INSTALLATION OF PLASTIC TRIM ON THE CEILING BRACKET

Access Hole Template Label

Washers

1/4 x 10 Lag Bolts

Cable Access Hole

CEILING BRACKET AN-PHCM20

Ceiling Beam

Ceiling Mounting Bracket

Cable access hole

Velcro

Security Bushing for use with Optional Security

Cable Kit Model AN-CMCSS16 or AN-CMCSS46

PAGE 5

Security Bushing

Press Velcro Tabs together

to secure plastic trim cover

in position

the in-

on the