- ページ 2

スイッチ Siemens SITRANS RD500のPDF アプリケーション・マニュアルをオンラインで閲覧またはダウンロードできます。Siemens SITRANS RD500 6 ページ。 Configuring sitrans rd500 for connection to multiranger with modbus rtu
Siemens SITRANS RD500 にも：取扱説明書 (48 ページ), 取扱説明書 (8 ページ), 取扱説明書 (8 ページ), 取扱説明書 (8 ページ), マニュアル (11 ページ), 応用例 (9 ページ)

ページを印刷する

Connecting SITRANS RD500 to MultiRanger

Connect the RS485 port on the SITRANS RD500 to the MultiRanger RS485 port on TB3 using wiring and practices in

accordance with local electrical codes and requirements.

Set up a connection between the PC and SITRANS RD500, referring to the SITRANS RD500 Application instruction

manual if necessary. Be sure that you have connected the PC to the RD500 using the Ethernet crossover cable. (Note:

This application guide assumes the SITRANS RD500 has default network settings.)

Setting Up a Data Log in RD500

Open a web browser and type http://192.168.2.100 into the browser address bar – use Login: admin Password: rd500

when prompted. Note: If a browser is already open, close it and restart to ensure it has the correct network settings.

The browser window will show the Overview page. Click on Configure and then Logs; you should see the screen below.

SITRANS RD500 – MultiRanger Configuration

RD500 RS485 port

MultiRanger TB3

TxA

TxB

COMM

COM (Terminal 34)

RD500

A (Terminal 35)

B (Terminal 36)

AG111710

MultiRanger

2 of 6