Siemens SITRANS RD500 애플리케이션 매뉴얼 - 페이지 2

{카테고리_이름} Siemens SITRANS RD500에 대한 애플리케이션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SITRANS RD500 6 페이지. Configuring sitrans rd500 for connection to multiranger with modbus rtu
Siemens SITRANS RD500에 대해서도 마찬가지입니다: 사용 설명서 (48 페이지), 사용 설명서 (8 페이지), 사용 설명서 (8 페이지), 사용 설명서 (8 페이지), 매뉴얼 (11 페이지), 적용 사례 (9 페이지)

페이지 인쇄
Siemens SITRANS RD500 애플리케이션 매뉴얼
Connecting SITRANS RD500 to MultiRanger
1.
Connect the RS485 port on the SITRANS RD500 to the MultiRanger RS485 port on TB3 using wiring and practices in
accordance with local electrical codes and requirements.
2.
Set up a connection between the PC and SITRANS RD500, referring to the SITRANS RD500 Application instruction
manual if necessary. Be sure that you have connected the PC to the RD500 using the Ethernet crossover cable. (Note:
This application guide assumes the SITRANS RD500 has default network settings.)
Setting Up a Data Log in RD500
1.
Open a web browser and type http://192.168.2.100 into the browser address bar – use Login: admin Password: rd500
when prompted. Note: If a browser is already open, close it and restart to ensure it has the correct network settings.
2.
The browser window will show the Overview page. Click on Configure and then Logs; you should see the screen below.
SITRANS RD500 – MultiRanger Configuration
RD500 RS485 port
MultiRanger TB3
TxA
TxB
COMM
COM (Terminal 34)
RD500
A (Terminal 35)
B (Terminal 36)
AG111710
MultiRanger
2 of 6