- ページ 18

無線アクセスポイント Cisco Aironet 1530のPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco Aironet 1530 41 ページ。 Outdoor access points

Wall Mounting the Access Point with the Fixed Mounting Kit

The optional fixed mounting kit contains a mounting bracket for wall mounting or pole mounting.

You can use the mounting bracket as a template to mark the positions of the mounting holes for your

installation. You then install the mounting plate, and attach the access point when you are ready.

Table 1

lists the materials you will need to provide in addition to the fixed mounting kit.

Table 1

Material Needed to Mount Access Point to a Vertical Wall

Materials Required

Ground lug and screws (provided with access point)

Wall Mount Bracket

Four M6 x 12-mm Hex-head Bolts

Two stainless steel band clamps (adjustable 2"–5", 51 mm –

127 mm)

Two stainless steel band clamps(adjustable 5"–8", 127 mm –

203 mm)

Crimping tool for ground lug, Panduit CT-720 with CD-720-1

die

(http://www.panduit.com)

Four wall mounting screws

Four wall anchors (specified for all material)

Drill bit for wall anchors

Electric drill and standard screwdriver

#6 AWG ground wire

Shielded outdoor-rated Ethernet (CAT5e or better) cable with

0.20 to 0.35 inch (0.51 to 0.89 cm) diameter

Grounding block

Grounding rod

10-mm box-end wrench or socket set

The mounting surface, attaching screws and optional wall anchors must be able to

Caution

support a 50-lb (22.7 kg) static weight.

To mount the access point on a vertical wall, follow these instructions:

In Kit

Yes