Cisco Aironet 1530 Başlangıç Kılavuzu - Sayfa 18

Kablosuz Erişim Noktası Cisco Aironet 1530 için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Cisco Aironet 1530 41 sayfaları. Outdoor access points

Wall Mounting the Access Point with the Fixed Mounting Kit
The optional fixed mounting kit contains a mounting bracket for wall mounting or pole mounting.
You can use the mounting bracket as a template to mark the positions of the mounting holes for your
installation. You then install the mounting plate, and attach the access point when you are ready.
Table 1
lists the materials you will need to provide in addition to the fixed mounting kit.
Table 1
Material Needed to Mount Access Point to a Vertical Wall
Materials Required
Ground lug and screws (provided with access point)
Wall Mount Bracket
Four M6 x 12-mm Hex-head Bolts
Two stainless steel band clamps (adjustable 2"–5", 51 mm –
127 mm)
Two stainless steel band clamps(adjustable 5"–8", 127 mm –
203 mm)
Crimping tool for ground lug, Panduit CT-720 with CD-720-1
die
(http://www.panduit.com)
Four wall mounting screws
Four wall anchors (specified for all material)
Drill bit for wall anchors
Electric drill and standard screwdriver
#6 AWG ground wire
Shielded outdoor-rated Ethernet (CAT5e or better) cable with
0.20 to 0.35 inch (0.51 to 0.89 cm) diameter
Grounding block
Grounding rod
10-mm box-end wrench or socket set
The mounting surface, attaching screws and optional wall anchors must be able to
Caution
support a 50-lb (22.7 kg) static weight.
To mount the access point on a vertical wall, follow these instructions:
18
In Kit
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No