Cisco Aironet 1530 시작하기 매뉴얼 - 페이지 18

{카테고리_이름} Cisco Aironet 1530에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1530 41 페이지. Outdoor access points

Wall Mounting the Access Point with the Fixed Mounting Kit

The optional fixed mounting kit contains a mounting bracket for wall mounting or pole mounting.

You can use the mounting bracket as a template to mark the positions of the mounting holes for your

installation. You then install the mounting plate, and attach the access point when you are ready.

Table 1

lists the materials you will need to provide in addition to the fixed mounting kit.

Table 1

Material Needed to Mount Access Point to a Vertical Wall

Materials Required

Ground lug and screws (provided with access point)

Wall Mount Bracket

Four M6 x 12-mm Hex-head Bolts

Two stainless steel band clamps (adjustable 2"–5", 51 mm –

127 mm)

Two stainless steel band clamps(adjustable 5"–8", 127 mm –

203 mm)

Crimping tool for ground lug, Panduit CT-720 with CD-720-1

die

(http://www.panduit.com)

Four wall mounting screws

Four wall anchors (specified for all material)

Drill bit for wall anchors

Electric drill and standard screwdriver

#6 AWG ground wire

Shielded outdoor-rated Ethernet (CAT5e or better) cable with

0.20 to 0.35 inch (0.51 to 0.89 cm) diameter

Grounding block

Grounding rod

10-mm box-end wrench or socket set

The mounting surface, attaching screws and optional wall anchors must be able to

Caution

support a 50-lb (22.7 kg) static weight.

To mount the access point on a vertical wall, follow these instructions:

In Kit

Yes