- ページ 10

無線アクセスポイント Cisco WAP150のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco WAP150 13 ページ。 Reboot and reset to factory default settings
Cisco WAP150 にも：マニュアル (4 ページ)

ページを印刷する

Rebooting the Cisco WAP150 or Resetting

to Factory Defaults

To reboot your Cisco WAP150:

• If the Cisco WAP150 uses a power adapter, with the power on, use the

POWER button to reboot the device. The POWER button only functions

when the Cisco WAP150 uses a power adapter.

• If the power supply is PoE, unplug your Ethernet connection for three

seconds and plug it back in.

• With the power on, press the RESET button with an opened paper clip

for less than 10 seconds, or until the lights go off.

–

When all the lights go off, release the RESET button.

–

Release the RESET button as soon as the lights go off, or you will

restore the Cisco WAP150 to factory default settings and lose your

configurations.

To reset the Cisco WAP150 to factory default settings:

• With the power on, press and hold the RESET button with an opened

paper clip for more than 10 seconds.

–

All of the lights will go off.

–

Release the RESET button when the power light turns on.

Cisco WAP150 Quick Start Guide