- ページ 7

ビデオカメラ Sony CCU-790PのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sony CCU-790P 18 ページ。 Camera control unit
Sony CCU-790P にも：パンフレット＆スペック (14 ページ)

ページを印刷する

B RET-1 (return video signal 1) connectors (BNC

type)

The upper connector accepts return video signal. The input

signal is output from the lower connector.

For details on the selection of RET-1, refer to Operation

Manual that came with the camera or camera adaptor.

C RET-2 (return video signal 2)/PROMPTER

connectors (BNC type)

The upper connector accepts return video signal or

teleprompter signal. The input signal is output from the

lower connector. The signal is split and output to the RET-

2 and PROMPTER signal lines.

For details on the selection of RET-2, refer to Operation

Manual that came with the camera or camera adaptor.

Use the switch on the internal board to output the prompter

signal.

For details on the internal boards, consult your Sony

service personnel.

D SDI (serial digital interface) RET-3/4 (return video

signal 3/4) connectors (BNC type)

Accept SDI return video signal. (These connectors are not

loop-through connectors.)

For details on the selection of RET-3 or RET-4, refer to

Operation Manual that came with the camera or camera

adaptor.

E COAX (coaxial) connector (BNC type)

Accepts and supplies signal from/to the video camera

using a coaxial cable. Power is not supplied to the camera

or a camera adaptor through this connector.

To use this connector, it is required to change the setting of

the internal board. For details, consult your Sony service

personnel.

F SPARE connector (BNC type)

Not used.

d OUTPUT connectors

A VBS/SDI-1, VBS/SDI-2, VBS/SDI-3

connectors

B Y/G, R-Y/R, B-Y/B connectors

C PIX connector

D SYNC connector

E WF connector

A VBS (composite video signal)/SDI (serial digital

interface)-1, VBS/SDI-2, VBS/SDI-3 connectors

(BNC type)

Supply the signal from the video camera in composite or

SDI format.

Use the switch on the internal board to select the composite

video signal or SDI signal.

For details on the internal boards, consult your Sony

service personnel.

B Y/G, R-Y/R, B-Y/B (component video signal/RGB

output) connectors (BNC type)

Supply the component signals or the R, G, and B signals

for the chroma keyer from each connector.

Use the switch on the internal board to select the signals to

be output.

For details on the internal boards, consult your Sony

service personnel.

C PIX (picture monitor output) connector (BNC type)

Supplies a video signal or video and character signals

together to a picture monitor.

Use the WF/PIX Select menu (in MSU-950, RCP-750/

751, or RM-B750) or the PICTURE MONITOR button (on

MSU-900) to select the signal output from the PIX

connector. When the output signal is changed on the RCP-

750/751 or the RM-B750, the waveform output on the

waveform monitor also changes.

D SYNC connector

Connect to the synchronous signal input connector on a

waveform monitor or picture monitor.

E WF (waveform monitor output) connector (BNC

type)

Supplies a video signal to a waveform monitor.

Use the WF/PIX Select menu (in MSU-950, RCP-750/

751, or RM-B750) or the WAVEFORM MONITOR button

Function and Location of Parts and Controls